How To Repair A Traverse Rod On Drapes

Maintenance How-To's: Ready Traverse Rods

January i, 2022

Here are some tips for keeping traverse rods working smoothly. When traverse rods bind so that drapes or curtains won't draw easily or at all, at that place are a few possible sources of the problem: loose brackets, uneven brackets, frayed cord, fouled pulley, broken glide or obstruction in the track.
Brackets
Get-go cheque to see that none of the brackets are coming loose from the wall or window molding. Sometimes brackets take been attached with nails, and nails work loose far faster than do screws. If yous discover that a blast has worked loose, pull it out and supplant information technology with a screw. If you really desire to do it right, remove all the nails and supersede them with screws.
If screws are coming loose, either tighten them or, if the hole is enlarged so that y'all cannot tighten the screw, use a plastic screw anchor in the pigsty or fill up information technology with match sticks, and then supersede the spiral.
If the brackets are solid, simply the rod seems to twist or curve, check to see that each of the brackets is the aforementioned altitude from the wall. Each bracket is adaptable with set screws that sometimes come loose or are bumped and get pushed back. If the measurements vary, adjust all of the brackets to the same measurement.
Cord and runway
If all of the brackets are in skillful condition, check the track for obstructions, such as cleaved glides, frayed strands from the cord, dirt or something else. Try to fish out any strange thing using a wire hook. This could require some patience, since the rod is formed with just a small opening on the side facing the wall. You might take to open the gate where the glides are put into the rail and move everything to the end to become to the block. You lot'll run across what I mean when y'all look at the rod.
Occasionally the draw string will become out of aligning or one of the slides won't work. If a slide doesn't draw, it's because the cord has go detached from it. If the drapes won't open evenly, information technology'south because the cord has slipped and then caught once more on the master slide.
To get the string and slides into proper aligning, movement both slides equally far to the outer ends of the rod as the glides will let y'all. Now unhook the master slide in gild to let the lagging slide get dorsum into the track. Re-hook information technology.
If you lot need to supersede the cord, considering information technology'due south worn or cleaved, see how the former string is fed into the machinery before your remove it. Draw a picture of the setup. Tie a simple one-half hitch around a knitting needle or long boom to pull the cord along the rod from i side to the other.
Of class, it goes without saying that working with traverse rods is much easier with the drapes removed.
Maintenance Tips
Drill $.25

• Keep a drill bit from sliding by covering the drilling area with a piece of masking tape. Poke a pigsty through the masking tape with a pencil or a blast, and drill in that spot. The masking record volition help keep the drill on target.
• Spray your drill bits with silicone earlier you lot use them. This volition prevent them from breaking and volition continue them precipitous longer.
• When drilling metal, try using a small-scale drill bit to amend accuracy.

Loose Screws

• Use thinned shellac to keep screws from rusting, or dip them in shellac to keep them anchored better.
• A spiral will plough more hands if the screw threads are soaped or waxed.

Nearly the Writer:

Some 30 years agone Bob Cain went to a no-money-down seminar and got the notion that owning rental property would be just the best idea in that location is for making money. He bought some. Trouble was, what he learned at the seminar didn't tell him how to make coin on his rental property. He went looking for assist in the course of a magazine or newsletter about the business. He couldn't find whatever. Ever set to bound at a groovy thought, he decided he could put his speaking and writing skills to piece of work and perform a valuable service for other investors who needed more information nigh property management. So Bob ferreted out the secrets, tricks and techniques of belongings direction wherever he found them; then he passed them along to other landlords. For over 25 years now, Bob has been publishing information, giving speeches, putting on seminars and workshops, and consulting for landlords on how to purchase, hire and manage holding more effectively.